View Relay "Hiddenphoeni"
Operator: f3netze.de (25 relays) ✓ Validated | Family: 1 relay | email:root-admin[]tutanota.com... | AS215381 | United States of America | Linux
- Consensus
- Not In Consensus (2/9 Directory Auths, need 5)
- BW Verified
- 0/6 BW Auths Measured 24 Kbit/s Median
- Stability
- Not Overloaded | DOWN 4d 6h 47m ago | UP 100% (1M)
- Reachability
- IPv4: 2/9 | v6: 0/7 (Directory Auths)
- First Seen
- 1mo 3w 15h ago
- BW Weight
- 0.00% of Network | 24 Mbit/s Observed By Relay
- Version
- 0.4.8.21 Recommended
Issues Detected:
-
Not in consensus
: Only 2/9 authorities voted for this relay (need 5)
Suggestion: Verify your relay is reachable from multiple geographic locations. Check firewall rules allow incoming connections on your ORPort from all directory authority IP addresses. -
IPv4 reachability issues
: Only 2/9 authorities can reach this relay
Suggestion: Authorities that cannot reach you: bastet, faravahar, gabelmoo, longclaw, maatuska, moria1, tor26. Check: 1) Firewall allows incoming TCP on ORPort, 2) No ISP-level blocking, 3) Tor is running and listening. Use 'nc -zv your-ip your-orport' from external hosts to test. -
IPv6 not reachable
: 0/7 authorities that test IPv6 can reach your IPv6 address
Suggestion: Verify IPv6 is correctly configured: 1) Check ORPort binding includes IPv6 address, 2) Firewall allows IPv6 traffic, 3) IPv6 address is publicly routable. Test with: curl -6 http://ipv6.icanhazip.com/ -
Low bandwidth authority measurements
: Only 0/6 bandwidth authorities measured this relay. Minimum 3 measurements needed for accurate consensus weight.
Suggestion: Low measurement count can indicate connectivity issues. Check: 1) Relay is reachable from multiple geographic locations, 2) ORPort accepts connections from bandwidth scanners, 3) RelayBandwidthRate in torrc matches actual capacity. New relays may take 1-2 days to be measured by all authorities.
Addresses
- OR Address
-
squeamish.atrouniify.cfd
193.242.184.158:9003
Reachability (Directory Authorities)
- IPv4
- 2/9
- IPv6
- 0/7 (2 don't test)
Location
- Country
-
United States of America
- Interactive Map
- View on Interactive Map
Eligible Flags (1):
Guard: 2/9 | Stable: 2/9 | Fast: 9/9 | HSDir: 2/9 | Running: 2/9
| V2Dir: 2/9
| Valid: 2/9
(need ≥5/9 for flag)
Eligibility Flag Vote Details
| Flag | Metric | Status | Relay Value | Threshold Required |
|---|---|---|---|---|
| Guard | WFU | Meets | 100.0% (DA) | ≥98% (all authorities) |
| Time Known | Meets | 50.9 days (DA) | ≥8 days (all authorities) | |
| Bandwidth | Meets (≥2 MB/s) | 24.8 Mbit/s (R) | ≥16.0 Mbit/s OR ≥80.0 Mbit/s-296.0 Mbit/s | |
| Stable | MTBF | Below | 51 days (DA) | ≥26.6d - 45.4d (varies) |
| Uptime | Below | 0.4d (R) | ≥19.1d - 19.7d (varies) | |
| Fast | Speed | Meets (≥100 KB/s) | 24.8 Mbit/s (R) | ≥800.0 Kbit/s (guarantee) OR top 7/8 |
| HSDir | WFU | Meets | 100.0% (DA) | ≥98.0% |
| Time Known | Meets | 50.9 days (DA) | ≥1.0d (most) / 9.9d (max) |
(DA) = Dir. Auth. Measured |
(R) = Relay Reported
Data from Tor CollecTor (authority votes, fetched 2026-01-10 04:46:16).
Last fetch was at Sat, 10 Jan 2026 04:47:26 GMT.
- Hiddenphoeni
-
BE18F2F59FC5016C8258288F9C5E8544B27F32DB - f3netze.de
- email:root-admin[]tutanota.com url:https://www.f3netze.de proof:dns-rsa hoster:liteserver donationurl:https://opencollective.com/ btc:bc1qlzlp282slvgmftd8uvlhaeyvdqfmmfl7ezn9fywt0y eth:0xdd754beaac6eced2bcbdc6faa48b4fdf5fb6d493 xmr:4pDZnEtWZ837MPaZP8HppjSgmhqjFOTyL9pNTOXbmEwdt2oNGON1ZXkkZDCTnDf4tcP8bkKwPHctE9MzKywAwx9vbSbm45H ciissversion:2
-
reject: 1-65535
-
none
-
reject *:*
-
BE18F2F59FC5016C8258288F9C5E8544B27F32DB
-
none
-
none
- 24.77 Mbit/s | 24.77 Mbit/s| 8.59 Gbit/s| 10.74 Gbit/s Not Measured
- 0.00% | N/A | N/A | N/A
- squeamish.atrouniify.cfd | 193.242.184.158:9003
- none
- none
-
United States of America
- View on Interactive Map
- AS215381 | ROCKHOSTER PRIVATE LIMITED (BGP.tools)
-
Fast
HSDir
Running
Stable
V2Dir
Valid
- Match Overall Uptime (100.0%/100.0%/0.0%/0.0%)
- 100.0%/100.0%/0.0%/0.0%
- DOWN 4d 6h 47m ago
- 1mo 3w 15h ago (2025-11-19 13:00:00) | 4d 6h 54m ago (2026-01-05 22:00:00)
- 8h 41m 49s ago (2026-01-09 20:13:10)
- 2025-11-19 13:00:00
- No
- Linux | Tor 0.4.8.21 on Linux
- 0.4.8.21 | Yes | recommended
Data from Tor CollecTor (authority votes, fetched 2026-01-10 04:46:16).
- Consensus Status (need ≥5/9): Not In Consensus — 2/9 authorities voted.
- Flag Eligibility (need ≥5/9 for flag): Guard: 2/9 | Stable: 2/9 | Fast: 9/9 | HSDir: 2/9 | Running: 2/9 | Valid: 2/9 | V2Dir: 2/9
- Reachability: IPv4: 2/9
- Consensus Weight (Dir. Auth.): Median: 24.8 Kbit/s | Min: 24.8 Kbit/s | Max: 24.8 Kbit/s
- Identified Issues:
-
Not in consensus: Only 2/9 authorities voted for this relay (need 5)
- Suggestion: Verify your relay is reachable from multiple geographic locations. Check firewall rules allow incoming connections on your ORPort from all directory authority IP addresses.
-
IPv4 reachability issues: Only 2/9 authorities can reach this relay
- Suggestion: Authorities that cannot reach you: bastet, faravahar, gabelmoo, longclaw, maatuska, moria1, tor26. Check: 1) Firewall allows incoming TCP on ORPort, 2) No ISP-level blocking, 3) Tor is running and listening. Use 'nc -zv your-ip your-orport' from external hosts to test.
-
IPv6 not reachable: 0/7 authorities that test IPv6 can reach your IPv6 address
- Suggestion: Verify IPv6 is correctly configured: 1) Check ORPort binding includes IPv6 address, 2) Firewall allows IPv6 traffic, 3) IPv6 address is publicly routable. Test with: curl -6 http://ipv6.icanhazip.com/
-
Low bandwidth authority measurements: Only 0/6 bandwidth authorities measured this relay. Minimum 3 measurements needed for accurate consensus weight.
- Suggestion: Low measurement count can indicate connectivity issues. Check: 1) Relay is reachable from multiple geographic locations, 2) ORPort accepts connections from bandwidth scanners, 3) RelayBandwidthRate in torrc matches actual capacity. New relays may take 1-2 days to be measured by all authorities.
-
Not in consensus: Only 2/9 authorities voted for this relay (need 5)
Green = meets threshold, Red = below threshold, Yellow = partial.
| Metric | Dir Auth Measured | Dir Auth Threshold | Status |
|---|---|---|---|
| In Consensus (Dir. Auth.) | 2/9 authorities | ≥5/9 (majority) | NOT IN CONSENSUS |
| Running (IPv4 Reachable) | 2/9 authorities reached this relay | ≥5/9 (majority) | NOT RUNNING |
| Valid | 2/9 (Running + Valid Descriptor) | ≥5/9 (majority) | NOT VALID |
| Consensus Weight (Dir. Auth.) | 24.8 Kbit/s (median) | N/A (no threshold, used for path selection) | — |
| Guard WFU (Dir. Auth., guard-wfu) | 100.0% | ≥98% (all authorities) | MEETS |
| Guard TK (Dir. Auth., tk) | 50.9 days | ≥8 days (all authorities) | MEETS |
| Guard BW (Relay Reported) | 24.8 Mbit/s | ≥16.0 Mbit/s OR ≥80.0 Mbit/s-296.0 Mbit/s | MEETS - ≥2 MB/s guarantee |
| Stable Uptime (Relay Reported) | 0.4d | ≥19.1d - 19.7d (typical) | BELOW - 0/9 |
| Stable MTBF (Dir. Auth., mtbf) | 51 days |
≥26.6d - 45.4d (typical)
[Stricter] moria1: ≥376.2d |
BELOW - 2/9 |
| Fast Speed (Relay Reported) | 24.8 Mbit/s |
≥800.0 Kbit/s (guarantee) OR ≥816.0 Kbit/s (typical)
[Stricter] moria1: ≥8.4 Mbit/s |
MEETS - ≥100 KB/s guarantee |
| HSDir WFU (Dir. Auth., wfu) | 100.0% | ≥98.0% (from all auths) | BELOW - 2/9 |
| HSDir TK (Dir. Auth., tk) | 50.9 days |
≥1.0d (8/9 auths)
[Stricter] moria1: ≥9.9d |
BELOW - 2/9 |
Each cell shows: your measured value | authority threshold. Green = meets, red = below. Flags: green = all authorities agree, yellow = partial.
| Authority | Running | Valid | BW Scan (Authority) | v4 | Flags | Fast (Relay|T) | Guard BW (Relay|Threshold) | Guard WFU (M|T) | Guard TK (M|T) | Stable MTBF (M|T) | Stable Uptime (Relay|T) | HSDir WFU (M|T) | HSDir TK (M|T) | Desc Published | Cons Wt (Authority) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| bastet (US) | No | — | Y | No | — | — | — | — | — | — | — | — | — | — | — |
| dannenberg (DE) | Yes | Yes | N | Yes | Fast, Guard, Running, Stable, V2Dir, Valid | 24.8 Mbit/s | 816.0 Kbit/s | 24.8 Mbit/s | 80.0 Mbit/s OR 16.0 Mbit/s | 100.0% | 98% | 50.9d | 8d | 50.9d | 35.7d | 0.4d | 20.2d | 100.0% | 98.0% | 50.9d | 1.0d | 2026-01-10 02:17:15 | 24.8 Kbit/s |
| dizum (NL) | Yes | Yes | N | Yes | Fast, Guard, Running, Stable, V2Dir, Valid | 24.8 Mbit/s | 816.0 Kbit/s | 24.8 Mbit/s | 80.0 Mbit/s OR 16.0 Mbit/s | 100.0% | 98% | 28.6d | 8d | 27.0d | 26.6d | 0.4d | 20.4d | 100.0% | 98.0% | 28.6d | 1.0d | 2026-01-10 02:17:15 | 24.8 Kbit/s |
| faravahar (US) | No | — | N | No | — | — | — | — | — | — | — | — | — | — | — |
| gabelmoo (DE) | No | — | Y | No | — | — | — | — | — | — | — | — | — | — | — |
| longclaw (US) | No | — | Y | No | — | — | — | — | — | — | — | — | — | — | — |
| maatuska (SE) | No | — | Y | No | — | — | — | — | — | — | — | — | — | — | — |
| moria1 (US) | No | — | Y | No | — | — | — | — | — | — | — | — | — | — | — |
| tor26 (AT) | No | — | Y | No | — | — | — | — | — | — | — | — | — | — | — |
— = not tested/available • Format: relay value | authority threshold • WFU = Weighted Fractional Uptime • TK = Time Known
Bandwidth Values Explained:
Relay Reported = Your relay's self-reported bandwidth from its descriptor (observed_bandwidth). Used for flag eligibility (Guard, Fast).
Authority Measured = Bandwidth measured by authority's sbws scanner. Used for consensus weight (path selection probability).
Why different? Authorities verify your reported bandwidth independently. 6 of 9 authorities run bandwidth scanners; 3 use relay-reported values directly.
Relay Reported = Your relay's self-reported bandwidth from its descriptor (observed_bandwidth). Used for flag eligibility (Guard, Fast).
Authority Measured = Bandwidth measured by authority's sbws scanner. Used for consensus weight (path selection probability).
Why different? Authorities verify your reported bandwidth independently. 6 of 9 authorities run bandwidth scanners; 3 use relay-reported values directly.
Stable Uptime (Two Data Sources):
Relay Uptime = From Onionoo API (last_restarted field). This is your relay's self-reported uptime from its descriptor. Same value for all authorities.
Authority Threshold = From CollecTor vote files (flag-thresholds stable-uptime). Each authority may have different thresholds.
Why two sources? Vote files contain authority thresholds but not per-relay uptime values. Onionoo aggregates relay descriptors which include uptime.
Relay Uptime = From Onionoo API (last_restarted field). This is your relay's self-reported uptime from its descriptor. Same value for all authorities.
Authority Threshold = From CollecTor vote files (flag-thresholds stable-uptime). Each authority may have different thresholds.
Why two sources? Vote files contain authority thresholds but not per-relay uptime values. Onionoo aggregates relay descriptors which include uptime.