View Relay "Serge"

Family: 3 relays | dir-auth AT nycbug.org | AS11403 | United States of America | OpenBSD

Health Status

Consensus
In Consensus (9/9 Directory Auths)
Flags
Authority, Running, Stable, V2Dir, Valid (5)
BW Verified
0/6 BW Auths Measured 816 bit/s Median
Stability
Not Overloaded | UP 1d 9h 3m ago | UP 100% (1M)
Reachability
IPv4: 9/9 | v6: 7/7 (Directory Auths)
First Seen
6y 10mo 4w ago
BW Weight
0.00% of Network | 8 Mbit/s Observed By Relay
Version
0.4.8.21 Recommended
Issues Detected:
  • Guard: bandwidth below threshold : Observed bandwidth 1.0 MB/s is below 2 MB/s minimum (AuthDirGuardBWGuarantee)
    Suggestion: Guard requires ≥2 MB/s bandwidth OR being in top 25% of network. To increase bandwidth: 1) Ensure adequate upstream capacity, 2) Check RelayBandwidthRate/RelayBandwidthBurst in torrc, 3) Monitor with Nyx or ARM.
  • Guard: requires Fast flag : Guard flag requires having the Fast flag first
    Suggestion: Get Fast flag by having bandwidth ≥100 KB/s OR in top 7/8ths of network. Most relays get this easily.
  • Low bandwidth authority measurements : Only 0/6 bandwidth authorities measured this relay. Minimum 3 measurements needed for accurate consensus weight.
    Suggestion: Low measurement count can indicate connectivity issues. Check: 1) Relay is reachable from multiple geographic locations, 2) ORPort accepts connections from bandwidth scanners, 3) RelayBandwidthRate in torrc matches actual capacity. New relays may take 1-2 days to be measured by all authorities.

Connectivity and Location

Addresses
OR Address
serge.nycbug.org
66.111.2.131:9001
[2610:1c0:0:5::131]:9001
Dir Address
66.111.2.131:9030
Reachability (Directory Authorities)
IPv4
9/9
IPv6
7/7 (2 don't test)
Location
Country
United States of America United States of America
Interactive Map
View on Interactive Map
Autonomous System
AS Number
AS11403
AS Name
NYI (BGP.tools)

Flags and Eligibility

Current Flags (5): Stable, Running, V2Dir, Valid, Authority
Eligible Flags (6): Guard: 0/9 | Stable: 7/9 | Fast: 9/9 | HSDir: 7/9 | Running: 9/9 | V2Dir: 9/9 | Valid: 9/9 (need ≥5/9 for flag)
Eligibility Flag Vote Details
Flag Metric Status Relay Value Threshold Required
Guard WFU Meets 100.0% (DA) ≥98% (all authorities)
Time Known Meets 196.6 days (DA) ≥8 days (all authorities)
Bandwidth Below 8.0 Mbit/s (R) ≥16.0 Mbit/s OR ≥80.0 Mbit/s-296.0 Mbit/s
Stable MTBF Partial (7/9) 197 days (DA) ≥26.6d - 45.4d (varies)
Uptime Below 1.4d (R) ≥19.1d - 19.7d (varies)
Fast Speed Meets (≥100 KB/s) 8.0 Mbit/s (R) ≥800.0 Kbit/s (guarantee) OR top 7/8
HSDir WFU Meets 100.0% (DA) ≥98.0%
Time Known Meets 196.6 days (DA) ≥1.0d (most) / 9.9d (max)

(DA) = Dir. Auth. Measured | (R) = Relay Reported
Data from Tor CollecTor (authority votes, fetched 2026-01-10 04:46:16).

Last fetch was at Sat, 10 Jan 2026 04:47:26 GMT.

Nickname
Serge
Fingerprint
BA44A889E64B93FAA2B114E02C2A279A8555C533
AROI (?)
none
Contact
dir-auth AT nycbug.org
IPv4 Exit Policy Summary 
reject: 
  1-65535
IPv6 Exit Policy Summary 
none
Exit Policy 
reject *:*
Effective Family Members: 3 (View) 
3F092986E9B87D3FDA09B71FA3A602378285C77A
BA44A889E64B93FAA2B114E02C2A279A8555C533
D317C7889162E9EC4A1DA1A1095C2A0F377536D9
Alleged Family Members: 0 
none
Indirect Family Members: 0 
none
Bandwidth Capacity (Observed | Advertised | Rate Limit | Burst Limit)
8.04 Mbit/s | 819.20 Kbit/s| 819.20 Kbit/s| 12.29 Mbit/s  Not Measured
Network Participation (Consensus Weight | Guard | Middle | Exit)
0.00% | N/A | 0.00% | N/A
OR Address
serge.nycbug.org | 66.111.2.131:9001, [2610:1c0:0:5::131]:9001
Exit Address
none
Dir Address
66.111.2.131:9030
Country
United States of America United States of America
Interactive Map
View on Interactive Map
Autonomous System (AS Number | AS Name)
AS11403 | NYI (BGP.tools)
Flags: 5
Authority Authority Running Running Stable Stable V2Dir V2Dir Valid Valid
Flag Uptime (1M/6M/1Y/5Y)
Match Overall Uptime (100.0%/100.0%/100.0%/100.0%)
Uptime (1M/6M/1Y/5Y)
100.0%/100.0%/100.0%/100.0%
Uptime / Downtime
UP 1d 9h 3m ago
Seen (First | Last)
6y 10mo 4w ago (2019-02-18 00:00:00) | 1h 55m 2s ago (2026-01-10 03:00:00)
Last Restarted
1d 9h 11m ago (2026-01-08 19:43:57)
Last Changed Address or Port
2024-01-29 19:00:00
Hibernating
No
Platform (Short | Long)
OpenBSD | Tor 0.4.8.21 on OpenBSD
Version (Running | Recommended | Status)
0.4.8.21 | Yes | recommended

Consensus Evaluation

Data from Tor CollecTor (authority votes, fetched 2026-01-10 04:46:16).

  • Consensus Status (need ≥5/9): In Consensus — 9/9 authorities voted.
  • Flag Eligibility (need ≥5/9 for flag): Guard: 0/9 | Stable: 7/9 | Fast: 9/9 | HSDir: 7/9 | Running: 9/9 | Valid: 9/9 | V2Dir: 9/9
  • Reachability: IPv4: 9/9 | IPv6: 7/7 (2 don't test)
  • Consensus Weight (Dir. Auth.): Median: 816 bit/s | Min: 816 bit/s | Max: 816 bit/s
  • Identified Issues:
    • Guard: bandwidth below threshold: Observed bandwidth 1.0 MB/s is below 2 MB/s minimum (AuthDirGuardBWGuarantee)
      • Suggestion: Guard requires ≥2 MB/s bandwidth OR being in top 25% of network. To increase bandwidth: 1) Ensure adequate upstream capacity, 2) Check RelayBandwidthRate/RelayBandwidthBurst in torrc, 3) Monitor with Nyx or ARM.
    • Guard: requires Fast flag: Guard flag requires having the Fast flag first
      • Suggestion: Get Fast flag by having bandwidth ≥100 KB/s OR in top 7/8ths of network. Most relays get this easily.
    • Low bandwidth authority measurements: Only 0/6 bandwidth authorities measured this relay. Minimum 3 measurements needed for accurate consensus weight.
      • Suggestion: Low measurement count can indicate connectivity issues. Check: 1) Relay is reachable from multiple geographic locations, 2) ORPort accepts connections from bandwidth scanners, 3) RelayBandwidthRate in torrc matches actual capacity. New relays may take 1-2 days to be measured by all authorities.

Summary: Your Relay vs Consensus

Green = meets threshold, Red = below threshold, Yellow = partial.

Metric Dir Auth Measured Dir Auth Threshold Status
In Consensus (Dir. Auth.) 9/9 authorities ≥5/9 (majority) IN CONSENSUS
Running (IPv4 Reachable) 9/9 authorities reached this relay ≥5/9 (majority) RUNNING
Valid 9/9 (Running + Valid Descriptor) ≥5/9 (majority) VALID
Consensus Weight (Dir. Auth.) 816 bit/s (median) N/A (no threshold, used for path selection) —
Guard WFU (Dir. Auth., guard-wfu) 100.0% ≥98% (all authorities) MEETS
Guard TK (Dir. Auth., tk) 196.6 days ≥8 days (all authorities) MEETS
Guard BW (Relay Reported) 8.0 Mbit/s ≥16.0 Mbit/s OR ≥80.0 Mbit/s-296.0 Mbit/s BELOW - need ≥2 MB/s
Stable Uptime (Relay Reported) 1.4d ≥19.1d - 19.7d (typical) BELOW - 0/9
Stable MTBF (Dir. Auth., mtbf) 197 days ≥26.6d - 45.4d (typical)
[Stricter] moria1: ≥376.2d 		PARTIAL - 7/9
Fast Speed (Relay Reported) 8.0 Mbit/s ≥800.0 Kbit/s (guarantee) OR ≥816.0 Kbit/s (typical)
[Stricter] moria1: ≥8.4 Mbit/s 		MEETS - ≥100 KB/s guarantee
HSDir WFU (Dir. Auth., wfu) 100.0% ≥98.0% (from all auths) PARTIAL - 7/9
HSDir TK (Dir. Auth., tk) 196.6 days ≥1.0d (8/9 auths)
[Stricter] moria1: ≥9.9d 		PARTIAL - 7/9
IPv6 Reachable (Dir. Auth.) 7/7 tested ≥4/7 (majority) REACHABLE

Per-Authority Details

Each cell shows: your measured value | authority threshold. Green = meets, red = below. Flags: green = all authorities agree, yellow = partial.

Authority Running Valid BW Scan (Authority) v4 v6 Flags Fast (Relay|T) Guard BW (Relay|Threshold) Guard WFU (M|T) Guard TK (M|T) Stable MTBF (M|T) Stable Uptime (Relay|T) HSDir WFU (M|T) HSDir TK (M|T) Desc Published Cons Wt (Authority)
bastet (US) Yes Yes Y Yes Yes Authority, Running, Stable, V2Dir, Valid 8.0 Mbit/s | 816.0 Kbit/s 8.0 Mbit/s | 224.0 Mbit/s OR 16.0 Mbit/s 100.0% | 98% 196.6d | 8d 196.6d | 47.0d 1.4d | 19.7d 100.0% | 98.0% 196.6d | 1.0d 2026-01-09 13:44:23 816 bit/s
dannenberg (DE) Yes Yes N Yes Yes Authority, Fast, Running, Stable, V2Dir, Valid 8.0 Mbit/s | 816.0 Kbit/s 8.0 Mbit/s | 80.0 Mbit/s OR 16.0 Mbit/s 100.0% | 98% 39.2d | 8d 38.3d | 35.7d 1.4d | 20.2d 100.0% | 98.0% 39.2d | 1.0d 2026-01-09 13:44:23 816 bit/s
dizum (NL) Yes Yes N Yes — Fast, Running, Stable, V2Dir, Valid 8.0 Mbit/s | 816.0 Kbit/s 8.0 Mbit/s | 80.0 Mbit/s OR 16.0 Mbit/s 100.0% | 98% 34.1d | 8d 32.2d | 26.6d 1.4d | 20.4d 100.0% | 98.0% 34.1d | 1.0d 2026-01-09 13:44:23 816 bit/s
faravahar (US) Yes Yes N Yes Yes Authority, Fast, Running, Stable, V2Dir, Valid 8.0 Mbit/s | 816.0 Kbit/s 8.0 Mbit/s | 80.0 Mbit/s OR 16.0 Mbit/s 100.0% | 98% 196.4d | 8d 196.4d | 41.9d 1.4d | 19.1d 100.0% | 98.0% 196.4d | 1.0d 2026-01-09 13:44:23 816 bit/s
gabelmoo (DE) Yes Yes Y Yes Yes Authority, V2Dir, Valid 8.0 Mbit/s | 816.0 Kbit/s 8.0 Mbit/s | 288.0 Mbit/s OR 16.0 Mbit/s 0.0% | 98% 0.0d | 8d 0.0d | 45.4d 1.4d | 19.6d 0.0% | 98.0% 0.0d | 1.0d 2026-01-09 13:44:23 816 bit/s
longclaw (US) Yes Yes Y Yes — Authority, Fast, Running, Stable, V2Dir, Valid 8.0 Mbit/s | 816.0 Kbit/s 8.0 Mbit/s | 80.0 Mbit/s OR 16.0 Mbit/s 100.0% | 98% 196.1d | 8d 196.1d | 48.7d 1.4d | 19.5d 100.0% | 98.0% 196.1d | 1.0d 2026-01-09 13:44:23 816 bit/s
maatuska (SE) Yes Yes Y Yes Yes Authority, Running, Stable, V2Dir, Valid 8.0 Mbit/s | 816.0 Kbit/s 8.0 Mbit/s | 296.0 Mbit/s OR 16.0 Mbit/s 100.0% | 98% 74.2d | 8d 74.2d | 42.3d 1.4d | 19.4d 100.0% | 98.0% 74.2d | 1.0d 2026-01-09 13:44:23 816 bit/s
moria1 (US) Yes Yes Y Yes Yes Authority, Running, Stable, V2Dir, Valid 8.0 Mbit/s | 8.4 Mbit/s 8.0 Mbit/s | 232.0 Mbit/s OR 16.0 Mbit/s 100.0% | 98% 9.7d | 8d 98.2d | 376.2d 1.4d | 20.4d 100.0% | 98.0% 9.7d | 9.9d 2026-01-09 13:44:23 816 bit/s
tor26 (AT) Yes Yes Y Yes Yes Authority, Running, Stable, V2Dir, Valid 8.0 Mbit/s | 816.0 Kbit/s 8.0 Mbit/s | 272.0 Mbit/s OR 16.0 Mbit/s 99.9% | 98% 73.5d | 8d 73.5d | 51.8d 1.4d | 19.7d 99.9% | 98.0% 73.5d | 1.0d 2026-01-09 13:44:23 816 bit/s

— = not tested/available • Format: relay value | authority threshold • WFU = Weighted Fractional Uptime • TK = Time Known

Bandwidth Values Explained:
Relay Reported = Your relay's self-reported bandwidth from its descriptor (observed_bandwidth). Used for flag eligibility (Guard, Fast).
Authority Measured = Bandwidth measured by authority's sbws scanner. Used for consensus weight (path selection probability).
Why different? Authorities verify your reported bandwidth independently. 6 of 9 authorities run bandwidth scanners; 3 use relay-reported values directly.
Stable Uptime (Two Data Sources):
Relay Uptime = From Onionoo API (last_restarted field). This is your relay's self-reported uptime from its descriptor. Same value for all authorities.
Authority Threshold = From CollecTor vote files (flag-thresholds stable-uptime). Each authority may have different thresholds.
Why two sources? Vote files contain authority thresholds but not per-relay uptime values. Onionoo aggregates relay descriptors which include uptime.