View Relay "yodjpy"

Family: 1 relay | AS3320 | Germany | Linux

Health Status

Consensus
In Consensus (9/9 Directory Auths)
Flags
Fast, Running, Stable, V2Dir, Valid (5)
BW Verified
5/6 BW Auths Measured 3680 bit/s Median
Stability
Overloaded | UP 3d 18h 41m ago | UP 99% (1M)
Reachability
IPv4: 9/9 (Directory Auths)
First Seen
5mo 3w 3d ago
BW Weight
0.00% of Network | 6 Mbit/s Observed By Relay
Version
0.4.8.21 Recommended
Issues Detected:
  • Guard: bandwidth below threshold : Observed bandwidth 0.9 MB/s is below 2 MB/s minimum (AuthDirGuardBWGuarantee)
    Suggestion: Guard requires ≥2 MB/s bandwidth OR being in top 25% of network. To increase bandwidth: 1) Ensure adequate upstream capacity, 2) Check RelayBandwidthRate/RelayBandwidthBurst in torrc, 3) Monitor with Nyx or ARM.
  • High consensus weight deviation : Large variation in Consensus Weight values across authorities (see 'Cons Wt' column in Per-Authority Details below)
    Suggestion: Consensus weight measurements vary significantly between authorities. This can affect traffic distribution. Ensure stable network connection and consistent bandwidth availability.
  • Write Bandwidth Limit Hit : Write rate limit (6 Mbit/s) was hit 2,102 times. Relay is throttling outbound traffic.
    Suggestion: Increase RelayBandwidthRate and RelayBandwidthBurst in torrc if your connection has more upload capacity.
  • Read Bandwidth Limit Hit : Read rate limit (6 Mbit/s) was hit 3,186 times. Relay is throttling inbound traffic.
    Suggestion: Increase RelayBandwidthRate and RelayBandwidthBurst in torrc if your connection has more download capacity.
Notes:
  • Rate Limit Configuration: Configured limits: Rate=6 Mbit/s, Burst=13 Mbit/s. Limits hit: Write=2,102, Read=3,186.

Connectivity and Location

Addresses
OR Address
pd95e8b3f.dip0.t-ipconnect.de
217.94.139.63:21336
Reachability (Directory Authorities)
IPv4
9/9
Location
Country
Germany Germany
Interactive Map
View on Interactive Map
Autonomous System
AS Number
AS3320
AS Name
Deutsche Telekom AG (BGP.tools)

Flags and Eligibility

Current Flags (5): Stable, Fast, Running, V2Dir, Valid
Eligible Flags (5): Guard: 0/9 | Stable: 1/9 | Fast: 9/9 | HSDir: 9/9 | Running: 9/9 | V2Dir: 9/9 | Valid: 9/9 (need ≥5/9 for flag)
Eligibility Flag Vote Details
Flag Metric Status Relay Value Threshold Required
Guard WFU Meets 99.5% (DA) ≥98% (all authorities)
Time Known Meets 16.9 days (DA) ≥8 days (all authorities)
Bandwidth Below 7.0 Mbit/s (R) ≥16.0 Mbit/s OR ≥80.0 Mbit/s-296.0 Mbit/s
Stable MTBF Below 17 days (DA) ≥26.6d - 45.4d (varies)
Uptime Below 3.8d (R) ≥19.1d - 19.7d (varies)
Fast Speed Meets (≥100 KB/s) 7.0 Mbit/s (R) ≥800.0 Kbit/s (guarantee) OR top 7/8
HSDir WFU Meets 99.5% (DA) ≥98.0%
Time Known Meets 16.9 days (DA) ≥1.0d (most) / 9.9d (max)

(DA) = Dir. Auth. Measured | (R) = Relay Reported
Data from Tor CollecTor (authority votes, fetched 2026-01-10 04:46:16).

Last fetch was at Sat, 10 Jan 2026 04:47:26 GMT.

Nickname
yodjpy
Fingerprint
45A6AF2C51E0DD509A46250D210C1A830CDCA7E6
AROI (?)
none
Contact
none
IPv4 Exit Policy Summary 
reject: 
  1-65535
IPv6 Exit Policy Summary 
none
Exit Policy 
reject *:*
Effective Family Member: 1 
45A6AF2C51E0DD509A46250D210C1A830CDCA7E6
Alleged Family Members: 0 
none
Indirect Family Members: 0 
none
Bandwidth Capacity (Observed | Advertised | Rate Limit | Burst Limit)
6.97 Mbit/s | 6.29 Mbit/s| 6.29 Mbit/s| 12.58 Mbit/s  Measured
Network Participation (Consensus Weight | Guard | Middle | Exit)
0.00% | N/A | 0.00% | N/A
OR Address
pd95e8b3f.dip0.t-ipconnect.de | 217.94.139.63:21336
Exit Address
none
Dir Address
none
Country
Germany Germany
Interactive Map
View on Interactive Map
Autonomous System (AS Number | AS Name)
AS3320 | Deutsche Telekom AG (BGP.tools)
Flags: 5
Fast Fast Running Running Stable Stable V2Dir V2Dir Valid Valid
Flag Uptime (1M/6M/1Y/5Y)
Match Overall Uptime (99.9%/99.9%/0.0%/0.0%)
Uptime (1M/6M/1Y/5Y)
99.9%/99.9%/0.0%/0.0%
Uptime / Downtime
UP 3d 18h 41m ago
Seen (First | Last)
5mo 3w 3d ago (2025-07-19 23:00:00) | 1h 55m 2s ago (2026-01-10 03:00:00)
Last Restarted
3d 18h 49m ago (2026-01-06 10:05:39)
Last Changed Address or Port
2026-01-06 11:00:00
Hibernating
No
Platform (Short | Long)
Linux | Tor 0.4.8.21 on Linux
Version (Running | Recommended | Status)
0.4.8.21 | Yes | recommended

Consensus Evaluation

Data from Tor CollecTor (authority votes, fetched 2026-01-10 04:46:16).

  • Consensus Status (need ≥5/9): In Consensus — 9/9 authorities voted.
  • Flag Eligibility (need ≥5/9 for flag): Guard: 0/9 | Stable: 1/9 | Fast: 9/9 | HSDir: 9/9 | Running: 9/9 | Valid: 9/9 | V2Dir: 9/9
  • Reachability: IPv4: 9/9
  • Consensus Weight (Dir. Auth.): Median: 3680 bit/s | Min: 880 bit/s | Max: 6288 bit/s [Warning] High deviation
  • Identified Issues:
    • Guard: bandwidth below threshold: Observed bandwidth 0.9 MB/s is below 2 MB/s minimum (AuthDirGuardBWGuarantee)
      • Suggestion: Guard requires ≥2 MB/s bandwidth OR being in top 25% of network. To increase bandwidth: 1) Ensure adequate upstream capacity, 2) Check RelayBandwidthRate/RelayBandwidthBurst in torrc, 3) Monitor with Nyx or ARM.
    • High consensus weight deviation: Large variation in Consensus Weight values across authorities (see 'Cons Wt' column in Per-Authority Details below)
      • Suggestion: Consensus weight measurements vary significantly between authorities. This can affect traffic distribution. Ensure stable network connection and consistent bandwidth availability.
    • Write Bandwidth Limit Hit: Write rate limit (6 Mbit/s) was hit 2,102 times. Relay is throttling outbound traffic.
      • Suggestion: Increase RelayBandwidthRate and RelayBandwidthBurst in torrc if your connection has more upload capacity.
    • Read Bandwidth Limit Hit: Read rate limit (6 Mbit/s) was hit 3,186 times. Relay is throttling inbound traffic.
      • Suggestion: Increase RelayBandwidthRate and RelayBandwidthBurst in torrc if your connection has more download capacity.
  • Notes:
    • Rate Limit Configuration: Configured limits: Rate=6 Mbit/s, Burst=13 Mbit/s. Limits hit: Write=2,102, Read=3,186.

Summary: Your Relay vs Consensus

Green = meets threshold, Red = below threshold, Yellow = partial.

Metric Dir Auth Measured Dir Auth Threshold Status
In Consensus (Dir. Auth.) 9/9 authorities ≥5/9 (majority) IN CONSENSUS
Running (IPv4 Reachable) 9/9 authorities reached this relay ≥5/9 (majority) RUNNING
Valid 9/9 (Running + Valid Descriptor) ≥5/9 (majority) VALID
Consensus Weight (Dir. Auth.) 3680 bit/s (median) N/A (no threshold, used for path selection) —
Guard WFU (Dir. Auth., guard-wfu) 99.5% ≥98% (all authorities) MEETS
Guard TK (Dir. Auth., tk) 16.9 days ≥8 days (all authorities) MEETS
Guard BW (Relay Reported) 7.0 Mbit/s ≥16.0 Mbit/s OR ≥80.0 Mbit/s-296.0 Mbit/s BELOW - need ≥2 MB/s
Stable Uptime (Relay Reported) 3.8d ≥19.1d - 19.7d (typical) BELOW - 0/9
Stable MTBF (Dir. Auth., mtbf) 17 days ≥26.6d - 45.4d (typical)
[Stricter] moria1: ≥376.2d 		BELOW - 1/9
Fast Speed (Relay Reported) 7.0 Mbit/s ≥800.0 Kbit/s (guarantee) OR ≥816.0 Kbit/s (typical)
[Stricter] moria1: ≥8.4 Mbit/s 		MEETS - ≥100 KB/s guarantee
HSDir WFU (Dir. Auth., wfu) 99.5% ≥98.0% (from all auths) MEETS - all 9 auths
HSDir TK (Dir. Auth., tk) 16.9 days ≥1.0d (8/9 auths)
[Stricter] moria1: ≥9.9d 		MEETS - all 9 auths

Per-Authority Details

Each cell shows: your measured value | authority threshold. Green = meets, red = below. Flags: green = all authorities agree, yellow = partial.

Authority Running Valid BW Scan (Authority) v4 Flags Fast (Relay|T) Guard BW (Relay|Threshold) Guard WFU (M|T) Guard TK (M|T) Stable MTBF (M|T) Stable Uptime (Relay|T) HSDir WFU (M|T) HSDir TK (M|T) Desc Published Cons Wt (Authority)
bastet (US) Yes Yes Y Yes Fast, Running, Stable, V2Dir, Valid 7.0 Mbit/s | 816.0 Kbit/s 7.0 Mbit/s | 224.0 Mbit/s OR 16.0 Mbit/s 99.5% | 98% 16.9d | 8d 8.4d | 47.0d 3.8d | 19.7d 99.5% | 98.0% 16.9d | 1.0d 2026-01-09 10:33:54 3440 bit/s
dannenberg (DE) Yes Yes N Yes Fast, Running, Stable, V2Dir, Valid 7.0 Mbit/s | 816.0 Kbit/s 7.0 Mbit/s | 80.0 Mbit/s OR 16.0 Mbit/s 99.5% | 98% 16.8d | 8d 8.4d | 35.7d 3.8d | 20.2d 99.5% | 98.0% 16.8d | 1.0d 2026-01-09 10:33:54 6288 bit/s
dizum (NL) Yes Yes N Yes Fast, Running, Stable, V2Dir, Valid 7.0 Mbit/s | 816.0 Kbit/s 7.0 Mbit/s | 80.0 Mbit/s OR 16.0 Mbit/s 99.4% | 98% 15.7d | 8d 7.5d | 26.6d 3.8d | 20.4d 99.4% | 98.0% 15.7d | 1.0d 2026-01-09 10:33:54 6288 bit/s
faravahar (US) Yes Yes N Yes Fast, Running, Stable, V2Dir, Valid 7.0 Mbit/s | 816.0 Kbit/s 7.0 Mbit/s | 80.0 Mbit/s OR 16.0 Mbit/s 99.5% | 98% 16.8d | 8d 8.4d | 41.9d 3.8d | 19.1d 99.5% | 98.0% 16.8d | 1.0d 2026-01-09 10:33:54 6288 bit/s
gabelmoo (DE) Yes Yes Y Yes Fast, Running, Stable, V2Dir, Valid 7.0 Mbit/s | 816.0 Kbit/s 7.0 Mbit/s | 288.0 Mbit/s OR 16.0 Mbit/s 99.5% | 98% 17.3d | 8d 8.5d | 45.4d 3.8d | 19.6d 99.5% | 98.0% 17.3d | 1.0d 2026-01-09 10:33:54 880 bit/s
longclaw (US) Yes Yes Y Yes Fast, Running, Stable, V2Dir, Valid 7.0 Mbit/s | 816.0 Kbit/s 7.0 Mbit/s | 80.0 Mbit/s OR 16.0 Mbit/s 99.5% | 98% 16.5d | 8d 8.3d | 48.7d 3.8d | 19.5d 99.5% | 98.0% 16.5d | 1.0d 2026-01-09 10:33:54 6288 bit/s
maatuska (SE) Yes Yes Y Yes Fast, Running, Stable, V2Dir, Valid 7.0 Mbit/s | 816.0 Kbit/s 7.0 Mbit/s | 296.0 Mbit/s OR 16.0 Mbit/s 99.5% | 98% 17.3d | 8d 8.5d | 42.3d 3.8d | 19.4d 99.5% | 98.0% 17.3d | 1.0d 2026-01-09 10:33:54 3680 bit/s
moria1 (US) Yes Yes Y Yes Running, Stable, V2Dir, Valid 7.0 Mbit/s | 8.4 Mbit/s 7.0 Mbit/s | 232.0 Mbit/s OR 16.0 Mbit/s 99.2% | 98% 9.9d | 8d 10375.9d | 376.2d 3.8d | 20.4d 99.2% | 98.0% 9.9d | 9.9d 2026-01-09 10:33:54 3360 bit/s
tor26 (AT) Yes Yes Y Yes Fast, Running, Stable, V2Dir, Valid 7.0 Mbit/s | 816.0 Kbit/s 7.0 Mbit/s | 272.0 Mbit/s OR 16.0 Mbit/s 99.5% | 98% 16.7d | 8d 8.3d | 51.8d 3.8d | 19.7d 99.5% | 98.0% 16.7d | 1.0d 2026-01-09 10:33:54 1120 bit/s

— = not tested/available • Format: relay value | authority threshold • WFU = Weighted Fractional Uptime • TK = Time Known

Bandwidth Values Explained:
Relay Reported = Your relay's self-reported bandwidth from its descriptor (observed_bandwidth). Used for flag eligibility (Guard, Fast).
Authority Measured = Bandwidth measured by authority's sbws scanner. Used for consensus weight (path selection probability).
Why different? Authorities verify your reported bandwidth independently. 6 of 9 authorities run bandwidth scanners; 3 use relay-reported values directly.
Stable Uptime (Two Data Sources):
Relay Uptime = From Onionoo API (last_restarted field). This is your relay's self-reported uptime from its descriptor. Same value for all authorities.
Authority Threshold = From CollecTor vote files (flag-thresholds stable-uptime). Each authority may have different thresholds.
Why two sources? Vote files contain authority thresholds but not per-relay uptime values. Onionoo aggregates relay descriptors which include uptime.